International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering (IJAREEIE) renders a platform for articles in all areas related to Adaptive Signal Processing, Analysis of Power Electronic Converters, Artificial Intelligence and Application to Electrical Engineering, Artificial Intelligence in Electronics, Asynchronous Machines, Basic Electrical Engineering, Bio Electronics, Control Theory and Application, Diagnosis and Sensing Systems, Digital Signal Processing, Electronics and Instrumentation Engineering on a monthly basis. The journal welcomes the submission of manuscripts with significant scientific importance. Articles will be published quickly after acceptance.
Authors are encouraged to submit their contributions to our editorial office at email@example.com OR directly through online Editorial Tracking system at:
A manuscript number will be e-mailed to the corresponding author within 72 hours.
Policy Regarding the NIH Mandate:
The journal will support authors by posting the published version of articles by NIH grant-holders and European or UK-based biomedical or life sciences grant holders to PubMed Central immediately after publication.
Article Processing Charges:
International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering is a self-financed journal and does not receive any funding from any institution/government. Therefore, the Journal operates solely through processing charges we receive from the authors.
Authors are hence required to pay a fair handling fee for processing their articles. However, there are no submission charges. Authors are required to make payment only after their manuscript has been accepted for publication.
Article Processing Charges:
All Articles USD 219
Submission of an Article:
In order to reduce delays, authors should adhere to the level, length and format of the Journal at every stage of processing right from manuscript submission to each revision stage. Submitted articles should have a 300 words summary/abstract, separate from the main text. The summary should provide a brief account of the work by clearly stating the purpose of the study and the methodology adopted, highlighting major findings briefly. The text may contain a few short subheadings of no more than 40 characters each.
Article Preparation Guidelines:
International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering welcomes Authors to submit articles related to Electrical, Electronics and Instrumentation Engineering and their vivid applications in basic science, business, industry and other relevant areas.
Type of Articles:
Authors can submit manuscripts in the following format:
1. Original research
2. Survey / Review articles, providing a comprehensive review on a scientific / research topic
3. Extended version of conferences / Journals / Workshops
4. Fast Communications: Short, self-contained articles on ongoing research
5. Technical Notes
Guidelines to Contributors:
1. Authors are requested to submit the manuscripts at firstname.lastname@example.org. Please submit the manuscript as MS Word document along with the copy right form given below:
Link for paper format
Link for Copy right form
2. All manuscripts must be the author(s) original, unpublished work and must not be under - consideration for publication elsewhere.
3. Each manuscript must include a minimum 100 to 150 words abstract and a list of 5-to-7 appropriate keywords. More than 8 pages articles will be charged extra USD5 per page.
4. A research article must have the following sections depending on the type of paper such as Research paper or survey paper or study paper:
o Title of Research Paper
o Author’s affiliation with Name, Designation, Department, Institute Name, Address, Country
o Abstract With Keywords
II. Background or related work
III. Presentation of the main contribution of the paper/ scope of research
IV. Proposed methodology
V. Experimental results
IX. Author’s biography with photograph.
5. Authors should submit proof readied and revised article. Before submission, please make sure that your paper is prepared using the specified template to ensure the swift process for publication.
6. Once the paper is accepted, the author(s) must send the completely filled in copyright form for the respective paper to the journal. If any copyrighted material is used by the author, the author must take permission for the same from the editor of the respective journal.
Peer review policy:
All submitted articles will be reviewed by two independent reviewers. Articles will be accepted depending on the reviewer’s positive comment and editor’s discretion.
Number all sheets in succession, including references, tables, and figure legends.
Title page is page 1. On the first page, type the running head (short title for top of each page), title (which cannot include any acronyms), names of the authors and their academic degrees, grants or other financial supporters of the study, address for correspondence and reprint requests, and corresponding author's telephone and fax numbers and e-mail address.
Guidelines for Research Articles:
Research articles are articles written based on the empirical/secondary data collected using a clearly defined research methodology, where conclusion is drawn from the analysis of the data collected.
The information must be based on original research that adds to the body of knowledge in in the subject.
Article/s should provide a critical description or analysis of the data presented while adding new and rapidly evolving areas in the field.
Include an abstract of minimum 100 to 150 words with 5 to 7 important keywords.
Research articles must adhere to a format constituting the introduction followed by a brief review of relevant literature, methodology applied (to collect the data), discussion and References, Tables, and Figure Legends.
Guidelines for Review Articles/Survey:
Review articles are written based mostly on secondary data that is falling in line with the theme of the journal. They are brief, yet critical discussions on a specific aspect of the subject concerned. Reviews generally start with the statement of the problem with a brief abstract of 150-300 words and few key words. Introduction generally brings the issue forward to the readers followed by analytical discussion with the help of necessary tables, graphs, pictures and illustrations wherever necessary. It summarizes the topic with a conclusion. All the statements or observations in the review articles must be based on necessary citations, providing complete reference at the end of the article.
Guidelines for Fast Communications:
Fast communications are opinion articles written mostly by the veteran and experienced writers on a specific development, recent innovation or research findings that fall in line with the theme of the journal. It straight away states the problems and provides a thorough analysis with the help of the illustrations, graphs and tables if necessary. It summarizes the topic with a brief conclusion, citing the references at the end.
Technical Notes are accepted with a view to add additional information related to the research that advances the field of Electrical, electronics and instrumental engineering.
It should add value to the main content/article submitted, by providing key insights about the core area.
Acknowledgement: This section includes acknowledgment of people, grant details, funds, etc.
The references of the articles should follow the below mentioned format.
 K. R. Chowdhury, M. Di Felice, “Search: a routing protocol for mobile cognitive radio ad hoc networks,” Computer Communication Journal, vol. 32, no. 18, pp. 1983-1997, Dec.20.
Reference from conference proceedings:
 Q. Wang, H. Zheng, “Route and spectrum selection in dynamic spectrum networks,” in Proc. IEEE CCNC 2006, pp. 625-629, Feb. 2006.
The preferred file formats for photographic images are .doc, TIFF and JPEG. If you have created images with separate components on different layers, please send us the Photoshop files.
All images must be at or above intended display size, with the following image resolutions: Line Art 800 dpi, Combination (Line Art + Halftone) 600 dpi, Halftone 300 dpi. See the Image quality specifications chart for details. Image files also must be cropped as close to the actual image as possible.
Use Arabic numerals to designate figures and upper case letters for their parts (Figure 1 :). Begin each legend with a title and include sufficient description so that the figure is understandable without reading the text of the manuscript. Information given in legends should not be repeated in the text.
Figure legends: These should be typed in numerical order on a separate sheet.
Tables and Equations as Graphics:
Preferably equations should be provided in MathType format, If equations cannot be encoded in MathType, submit them in TIFF or EPS format as discrete files (i.e., a file containing only the data for one equation).
All Supplementary Information (figures, tables and Summary diagram/, etc.) is supplied as a single PDF file, where possible. File size within the permitted limits for Supplementary Information. Images should be a maximum size of 640 x 480 pixels (9 x 6.8 inches at 72 pixels per inch).
Proofs and Reprints:
Electronic proofs will be sent as an e-mail attachment to the corresponding author as a PDF file. Page proofs are considered to be the final version of the manuscript and no changes will be made in the manuscript at the proof stage. Authors can freely download the PDF file. Hard copies of the documents are available on request.
All authors publishing their valuable work in International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering should submit the filled in copyright form in due time.