Research Article Open Access

Implementation of SSSC-Based Cascade H-Bridge Model using Compensation Technique

Abstract

The SSSC is used to operate the transmission line at stable condition. Various schemes of SSSC is already proposed. And a still lot of scope is left in this development to make it more efficient in terms of voltage stress, switching losses and harmonic suppression. The scheme proposed here is used to produce a H - bridge based cascaded inverter. It can produce the pulses with different width and magnitude. It almost resembles a sine wave at the output of transformer. The output results are compared with conventional type SSSC with cascaded type. This paper solved only the simulation part of this work. In the proposed work a scale down model of the SSSC can be proposed to build. This scale down model can be used to analysis the different situations like voltage compensation part. The sample of voltage and current will be taken from the transmission line and is given to the processor to decide the firing angle for the thyristor device. A cascaded type H - bridge based multilevel inverter is used as SSSC. Three DC separate sources are used here as energy source for the SSSC. These three DC source can be interfaced with SSSC in a sequential manner as explained in different modes. This sequential switching is helpful in reducing switching losses and switching stresses.

P. Shahanaz Salma

To read the full article Download Full Article | Visit Full Article