Special Issue Article Open Access

Modeling of Fuel Cell Based Power System for Grid Interface Using Different Controllers

Abstract

In the near future, some fuel cell systems could be an accessible and attractive alternative to conventional electricity generation. Renewable energy systems have developed wide interest to supply electricity in remote areas as well as for distributed power generation particularly during peak loads. Fuel-cell-based power generation is also gaining popularity in residential applications as well as distributed power generation due to its cleanliness, portability, and suitability for electricity and heat generation. Development of a suitable power electronic interface to make the technology viable is still a challenge. This paper presents modeling, simulation, and experimental study of a fuel cell (FC) power plant (FCPP) suitable for stand-alone application as well as for micro grid/ grid interface using different controllers like PI Controller, PID Controller and Fuzzy Logic Controllers. A single-stage pulse width modulation inverter is selected as power electronic interface between FC and grid. A mathematical model is developed in per unit system to define the power limits in terms of FC, converter, and power system parameters. The simulation model is developed in MATLAB environment with control scheme implementation in qd reference frame for investigation. A comparative assessment of the three different controllers is brought out.

Blessy A Rahiman , Aparna Thampi

To read the full article Download Full Article | Visit Full Article