ISSN:2321-6212
Res. Rev. J Mat. Sci
R. Poyato, C. Lopez-Pernia, C. Munoz-Ferreiro, C. Gonzalez-Orellana, A. Morales-RodriÂÂguez and A. Gallardo-Lopez
Performance of granite dust as filler in ordinary portland cement
Res. Rev. J Mat. Sci
Eugene Atiemo, Sarfo-Ansah, J., Boakye, K. A., Tagbor, T. A and Adjei, D.
Res. Rev. J Mat. Sci
Santiranjan Shannigrahi
Role of sintering method on graphene/3YTZP composites
Res. Rev. J Mat. Sci
C. Lopez-Pernia, R. Poyato, A.Morales-Rodriguez and A.Gallardo-Lopez
Process development for the ceramic injection molding of oxide short fiber reinforced CMCs
Res. Rev. J Mat. Sci
Metin Tülümen, Benjamin Ehreiser, Thomas Hanemann, Rainer Oberacker and Volker Piotter
Res. Rev. J Mat. Sci
Ignas K. Tonle, Francis M. M. Tchieno, Ervice Ymele, Sherman Z. Jiokeng and Emmanuel Ngameni
Res. Rev. J Mat. Sci
Danjela Kuscer, Tina Bakaric, Silvo Drnovsek, Barbara Malic, Julien Bustillo and Franck Levassort
Preparation of zirconium-based porous ultra-high temperature ceramics via sol-gel precursors
Res. Rev. J Mat. Sci
Xiao Huang
Practical approaches to energy efficiency improvement in SiC-based ceramics processing
Res. Rev. J Mat. Sci
Maria A. Vartanyan, Nikolay A. Makarov and Tatiana V. Guseva
3D-printing of ceramic-based porous structures using stereolithography
Res. Rev. J Mat. Sci
A. Dieraert, S. Chupin, C. Sanchez and Ph. Belleville
Ceramics in the system ZrO2-Al2O3 with eutectic additives
Res. Rev. J Mat. Sci
Nikolay A. Makarov and Dmitry A. Antonov
Homogeneous precipitation of ceramic powders preparation from sulfate-sulfite-ammonia system
Res. Rev. J Mat. Sci
Satoshi Sugita
Usage of boron waste in transparent glazes
Res. Rev. J Mat. Sci
Fidan Tonza, Ceren Peksen and Erhan Ayas
Res. Rev. J Mat. Sci
Ceren Peksen, Remzi Caylak, Nusret Kose and Aydin Dogan